Machine Sheds · Winona Pole Barns
Machine Shed Builders in Winona, MN
Equipment storage sized to your machines and fit to your farm's ground.
Machine Sheds across Winona, Houston and Wabasha counties
Get a Free Machine Shed Quote
Tell us the size, what it's for and where the land is. A builder calls you back with a free quote.
- Free quotes
- No obligation
- Shells to finished buildings
- Site prep included
Fill out the form below for your free quote 👇
Machine Sheds
Machine Shed Builders for Winona, MN
Farms in the bluff country are often smaller and steeper than the big prairie operations, and the equipment shed has to work with that. A flat spot near the yard might be the only place a building fits, and the lane to it may climb or curve. We plan door size, orientation and turning room around how your machines actually move on the property.
Tractors, hay equipment, wagons, a baler and perhaps a skid steer or a truck sit inside, so the clear span and door height are set from the biggest piece. Sliding doors, or doors on both ends, make it easier to drive in and out on cramped ground. The pad is graded for drainage because water running off a hillside can undermine a floor.
What's included
What goes into machine sheds
- 01
Orientation
The shed turned so doors face the lane and machines do not have to back around a slope.
- 02
Clear span
Trusses that leave the inside open for tractors, balers and wagons.
- 03
Wide doors
Sliding or bifold doors set from the tallest and widest machine.
- 04
Hillside drainage
A graded pad and a drainage path that catches water coming off the slope above.
- 05
Floor choice
Gravel for plain storage, concrete where you work on equipment.
- 06
Add-on bays
A lean-to for hay or small tools, engineered for the drift off the main roof.
Building ideas
Machine Sheds: what they can look like
Example photos of the building type.
How it works
How a machine shed job works
- 1
Measure the equipment
Dimensions of each machine, and how they get in and out.
- 2
Find the flat spot
Where on the farm the shed can sit and how the lane reaches it.
- 3
Engineer and permit
Structural plans for the span, then the township or county steps.
- 4
Raise the shed
Pad, posts, trusses, steel and doors, then the floor.
Questions
Machine Sheds FAQs
What if the only level spot on my farm is small?
Then the pad is cut and filled to make more of it, and the building is sized to fit. Retaining or drainage work may help. A narrower shed with doors on both ends can solve a lot of tight-site problems.
Is a farm machine shed exempt from building permits?
A building used on a working farm can be exempt from the State Building Code, but setbacks, driveway access and county land-use rules can still apply. Streams and the river add shoreland limits. We confirm what applies to your parcel.
What does a machine shed cost?
The width, length, height, door sizes and floor decide most of it. Hillside sites add dirt work, and a concrete floor costs more than gravel. Send your equipment list and a builder quotes the building to fit.
How do you protect a shed from runoff on a hillside?
With grading and drainage planned before construction. The pad is shaped so water goes around the building, a swale or tile line catches runoff from above, and the floor sits above the surrounding grade.
Can the shed also be used for hay?
Yes, with a lean-to or a divided bay. Hay needs airflow, so open or vented sides help, and it should stay away from the shop area. We can plan both uses in one frame.
Related buildings
You might also be planning
Post Frame Buildings
Post frame buildings for farm, shop, storage and small business use on uneven ground.
More on post frame buildings
Horse Barns
Stall barns, tack rooms and run-ins for horse property on hills and pasture.
More on horse barns
Pole Sheds & Storage Buildings
Storage buildings for pontoons, boats, campers, side-by-sides, snowmobiles and hay.
More on pole sheds & storage buildings
Where we build
Machine Sheds in these towns
We build machine sheds fitted to hillside farm yards in every town below.
Ready to price your machine shed?
Free quotes. Call or fill out the form.